My car has a crack in the paint on the quarter panel just behind the passenger door.
The car was shot with black paint from an itr.

Its noticeable and about 3 inches total diameter.

Since Im selling the car shortly and dont really want to deal with painting the whole car , is there a way to just sand the area and have it reshot ?

I know it doesn’t make sense not to do the job right and paint the whole car or at least the whole panel itself but can this be done cheaply and still …

So someone pulled a hit and run on my car last night and left several large dents in my rear quarter panel.

I’ve been looking at the position and size of the dents to try to figure out how/what happened. The car was parallel parked on a street.

I live in the city and don’t have a garage, but will be getting one in a couple of months when I move to another apartment. I won’t be repairing this until I have a garage for the car.

Can these dents be pulled out? What kind of process will …

I’m about to pick up a carbon fiber hood that has been painted and i’m wanting to take the paint off and bring back the cf look.

I asked around and some people said use 1500 grit then 2000 grit wet sanded then buff and polish it.

Others have told me to take 800 grit and reclear it. any ideas what would work better or any other ideas that are known to work?
Our Suggestion
The problem with your project is that by sanding the paint off will most likely do damage to the carbon fiber resins.

Another thing to …

Hi, i bought a new project Civic, off a friend so I know what was done to it. It was black from the factory, but when he bought it with rust, he cut out the rust, used bondo, krylon primer, and then krylon satin black paint.

Is it impossible to spray over the krylon paint with any sort of quality paint? Ive done a little research and one thread I came across was oven cleaner, of all things, apparently will remove the krylon easily instead of hours of sanding.

This is a low budget daily driver, so …